$ EZ-EDS Version 3.9 Generated Electronic Data Sheet
[File]
DescText = "EthernetIP EDS file for LinMot Linear Servo Drive E1450-IP-QN0S";
CreateDate = 09-06-2012;
CreateTime = 13:04:10;
ModDate = 09-13-2012;
ModTime = 12:49:57;
Revision = 1.0;
HomeURL = "http://www.linmot.com/";
1_IOC_Details_License = 0xDE7972BB;
[Device]
VendCode = 589;
VendName = "LinMot";
ProdType = 43;
ProdTypeStr = "Generic Device";
ProdCode = 1782;
MajRev = 1;
MinRev = 1;
ProdName = "E1450IPQN0S";
Catalog = "LMDrive";
Icon = "E1250_SC_xx.ico";
IconContents =
"AAABAAEAICAQAAEABADoAgAAFgAAACgAAAAgAAAAQAAAAAEABAAAAAAAAAAA"
"AAAAAAAAAAAAAAAAAAAAAAAAAAAAKrwqALKysgD///8AAAAAAAAAAAAAAAAA"
"AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAMzMzMzMzIiIi"
"IjMzMzMzMzMzMzMzMyACIAIzMzMzMzMzMzMzMzMgAiACMzMzMzMzMzMzMzMz"
"IiIiIjMzMzMzMzMzMzMzMyACIAIzMzMzMzMzMzMzMzMgAiACMzMzMzMzMzMz"
"MzMzIiIiIjMzMzMzMzMzMzMzMyIiIgIzMzMzMzMzMzMzMzMiIiIiMzMzMzMz"
"MzMzMzMzIiIiAjMzMzMzMzMzMzMzMyIiIiIzMzMzMzMzMzMzMzMiIiESMzMz"
"MzMzMzMzMzMzIiIhEjMzMzMzMzMzMzMzMyIiIRIzMzMzMzMzMzMzMzMiIiES"
"MzMzMzMzMzMzMzMzIiIhEjMzMzMzMzMzMzMzMyIiIRIzMzMzMzMzMzMzMzMi"
"IiIiMzMzMzMzMzMzMzMzIiIgAjMzMzMzMzMzMzMzMyIAIAIzMzMzMzMzMzMz"
"MzMiACACMzMzMzMzMzMzMzMzIgAgAjMzMzMzMzMzMzMzMyIiIAIzMzMzMzMz"
"MzMzMzMiIiIiMzMzMzMzMzMzMzMzIREREjMzMzMzMzMzMzMzMyEBABIzMzMz"
"MzMzMzMzMzMhERESMzMzMzMzMzMzMzMzIQEAEjMzMzMzMzMzMzMzMyERERIz"
"MzMzMzMzMzMzMzMhAQASMzMzMzMzMzMzMzMzIREREjMzMzMzMzMzMzMzMyIi"
"IiIzMzMzMzMAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"
"AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"
"AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"
"AA==";
[Device Classification]
Class1 = EtherNetIP;
[Params]
Param1 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_ControlWord", $ name
"", $ units
"Motioncontrol Software Control Word", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param2 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_MotionCommandHeader", $ name
"", $ units
"Motioncontrol Software Motion Command Header", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param3 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_MotionCommandByte_00_01", $ name
"", $ units
"MotionCommand Parameter1 LowWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param4 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_MotionCommandByte_02_03", $ name
"", $ units
"Motion Command Parameter 1 HighWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param5 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_MotionCommandByte_04_05", $ name
"", $ units
"Motion Command Parameter 2 LowWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param6 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_MotionCommandByte_06_07", $ name
"", $ units
"Motion Command Parameter 2 HighWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param7 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_MotionCommandByte_08_09", $ name
"", $ units
"Motion Command Parameter 3 LowWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param8 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_StateVar", $ name
"", $ units
"Bit Coded State Variable", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param9 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_StatusWord", $ name
"", $ units
"Bit coded Status Word",$ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param10 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_WarnWord", $ name
"", $ units
"Bit Coded Warn Word", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param11 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_DemandPosition_LowWord", $ name
"", $ units
"Motioncommand Sofware Demandposition LowWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param12 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_ActualPosition_LowWord", $ name
"", $ units
"Motioncommand Software Actualposition LowWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param13 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW DemandCurrent_LowWord", $ name
"", $ units
"Motioncommand Software Demand Current LowWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param14 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"TX_Cfg_Module_Control",$ name
"", $ units
"Transfered Config Module Control", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param15 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"TX_Cfg_Module_Index", $ name
"", $ units
"Transfered Config Module UPID", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param16 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"TX_Cfg_Module_Value_LowWord", $ name
"", $ units
"Transfered Config Module Value LowWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param17 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"RX_Cfg_Module_Status", $ name
"", $ units
"Received Config Module Status", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param18 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"RX_Cfg_Module_Index", $ name
"", $ units
"Received Config Module UPID", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param19 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"RX_Cfg_Module_Value LowWord", $ name
"", $ units
"Received Config Module Value LowWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param20 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_MotionCommandByte_10_11", $ name
"", $ units
"Motioncommand Parameter 3 HightWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param21 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_MotionCommandByte_12_13", $ name
"", $ units
"Motion Command Parameter 4 LowWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param22 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_MotionCommandByte_14_15", $ name
"", $ units
"Motion Command Parameter 4 HightWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param23 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_MotionCommandByte_16_17", $ name
"", $ units
"Motion Command Parameter 5 LowWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param24 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_MotionCommandByte_18_19", $ name
"", $ units
"Motion Command Parameter 5 HightWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param25 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_DemandPosition_HighWord", $ name
"", $ units
"Motioncommand Sofware Demandposition HighWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param26 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW_ActualPosition_HighWord", $ name
"", $ units
"Motioncommand Software Actualposition HighWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param27 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"TX_Cfg_Module_Value_HighWord", $ name
"", $ units
"Transfered Config Module Value HighWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param28 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"RX_Cfg_Module_Value HighWord", $ name
"", $ units
"Received Config Module Value HighWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
Param29 =
0, $ reserved, shall equal 0
,, $ Link Path Size, Link Path
0x0000, $ Descriptor
0xC3, $ Data Type
2, $ Data Size in bytes
"MCSW DemandCurrent_HighWord", $ name
"", $ units
"Motioncommand Software Demand Current HighWord", $ help string
,,0, $ min, max, default data values
,,,, $ mult, div, base, offset scaling
,,,, $ mult, div, base, offset links
; $ decimal places
[Assembly]
Assem8 =
"Output Assembly",
,
8,
0x0000,
,,
16,Param14,
16,Param15,
16,Param16,
16,Param27;
Assem16 =
"Input Assembly",
,
18,
0x0000,
,,
16,Param8,
16,Param9,
16,Param10,
16,Param11,
16,Param25,
16,Param12,
16,Param26,
16,Param13,
16,Param29;
Assem24 =
"Input Assembly",
,
26,
0x0000,
,,
16,Param8,
16,Param9,
16,Param10,
16,Param11,
16,Param25,
16,Param12,
16,Param26,
16,Param13,
16,Param29,
16,Param17,
16,Param18,
16,Param19,
16,Param28;
Assem32 =
"Output Assembly",
,
24,
0x0000,
,,
16,Param1,
16,Param2,
16,Param3,
16,Param4,
16,Param5,
16,Param6,
16,Param7,
16,Param20,
16,Param21,
16,Param22,
16,Param23,
16,Param24;
Assem39 =
"Output Assembly",
,
,
0x0000,
,,
16,Param2,
16,Param3,
16,Param4,
16,Param5,
16,Param6,
16,Param7,
16,Param20,
16,Param21,
16,Param22,
16,Param23,
16,Param24,
16,Param14,
16,Param15,
16,Param16,
16,Param27;
Assem40 =
"Output Assembly",
,
32,
0x0000,
,,
16,Param1,
16,Param2,
16,Param3,
16,Param4,
16,Param5,
16,Param6,
16,Param7,
16,Param20,
16,Param21,
16,Param22,
16,Param23,
16,Param24,
16,Param14,
16,Param15,
16,Param16,
16,Param27;
[Connection Manager]
Connection1 =
0x04010002, $ 0-15 = supported transport classes
$ 16 = trigger: cyclic
$ 17 = trigger: change of state
$ 18 = trigger: application
$ 19-23 = trigger: reserved
$ 24 = application type: listen-only
$ 25 = application type: input-only
$ 26 = application type: exclusive-owner
$ 27 = application type: redundant-owner
$ 28-30 = reserved
$ 31 = Direction: Client = 0 / Server = 1
0x22640405, $ 0 = O->T fixed size supported
$ 1 = O->T variable size supported
$ 2 = T->O fixed size supported
$ 3 = T->O variable size supported
$ 4-5 = O->T number of bytes per slot (obsolete)
$ 6-7 = T->O number of bytes per slot (obsolete)
$ 8-10 = O->T Real time transfer format
$ 11 = reserved
$ 12-14 = T->O Real time transfer format
$ 15 = reserved
$ 16 = O->T connection type: NULL
$ 17 = O->T connection type: MULTICAST
$ 18 = O->T connection type: POINT2POINT
$ 19 = O->T connection type: reserved
$ 20 = T->O connection type: NULL
$ 21 = T->O connection type: MULTICAST
$ 22 = T->O connection type: POINT2POINT
$ 23 = T->O connection type: reserved
$ 24 = O->T priority: LOW
$ 25 = O->T priority: HIGH
$ 26 = O->T priority: SCHEDULED
$ 27 = O->T priority: reserved
$ 28 = T->O priority: LOW
$ 29 = T->O priority: HIGH
$ 30 = T->O priority: SCHEDULED
$ 31 = T->O priority: reserved
,,Assem40, $ O->T RPI, size, format
,,Assem24, $ T->O RPI, size, format
,, $ proxy config size, format
,, $ target config size, format
"As_0x28_0x18", $ Connection Name
"Connection with Assemblies 0x28 and 0x18", $ help string
"20 04 24 01 2C 28 2C 18"; $ Path
Connection2 =
0x04010002, $ 0-15 = supported transport classes
$ 16 = trigger: cyclic
$ 17 = trigger: change of state
$ 18 = trigger: application
$ 19-23 = trigger: reserved
$ 24 = application type: listen-only
$ 25 = application type: input-only
$ 26 = application type: exclusive-owner
$ 27 = application type: redundant-owner
$ 28-30 = reserved
$ 31 = Direction: Client = 0 / Server = 1
0x22640405, $ 0 = O->T fixed size supported
$ 1 = O->T variable size supported
$ 2 = T->O fixed size supported
$ 3 = T->O variable size supported
$ 4-5 = O->T number of bytes per slot (obsolete)
$ 6-7 = T->O number of bytes per slot (obsolete)
$ 8-10 = O->T Real time transfer format
$ 11 = reserved
$ 12-14 = T->O Real time transfer format
$ 15 = reserved
$ 16 = O->T connection type: NULL
$ 17 = O->T connection type: MULTICAST
$ 18 = O->T connection type: POINT2POINT
$ 19 = O->T connection type: reserved
$ 20 = T->O connection type: NULL
$ 21 = T->O connection type: MULTICAST
$ 22 = T->O connection type: POINT2POINT
$ 23 = T->O connection type: reserved
$ 24 = O->T priority: LOW
$ 25 = O->T priority: HIGH
$ 26 = O->T priority: SCHEDULED
$ 27 = O->T priority: reserved
$ 28 = T->O priority: LOW
$ 29 = T->O priority: HIGH
$ 30 = T->O priority: SCHEDULED
$ 31 = T->O priority: reserved
,,Assem32, $ O->T RPI, size, format
,,Assem16, $ T->O RPI, size, format
,, $ proxy config size, format
,, $ target config size, format
"As_0x20_0x10", $ Connection Name
"Connection with Assemblies 0x20 and 0x10", $ help string
"20 04 24 01 2C 20 2C 10"; $ Path
Connection3 =
0x04010002, $ 0-15 = supported transport classes
$ 16 = trigger: cyclic
$ 17 = trigger: change of state
$ 18 = trigger: application
$ 19-23 = trigger: reserved
$ 24 = application type: listen-only
$ 25 = application type: input-only
$ 26 = application type: exclusive-owner
$ 27 = application type: redundant-owner
$ 28-30 = reserved
$ 31 = Direction: Client = 0 / Server = 1
0x22660405, $ 0 = O->T fixed size supported
$ 1 = O->T variable size supported
$ 2 = T->O fixed size supported
$ 3 = T->O variable size supported
$ 4-5 = O->T number of bytes per slot (obsolete)
$ 6-7 = T->O number of bytes per slot (obsolete)
$ 8-10 = O->T Real time transfer format
$ 11 = reserved
$ 12-14 = T->O Real time transfer format
$ 15 = reserved
$ 16 = O->T connection type: NULL
$ 17 = O->T connection type: MULTICAST
$ 18 = O->T connection type: POINT2POINT
$ 19 = O->T connection type: reserved
$ 20 = T->O connection type: NULL
$ 21 = T->O connection type: MULTICAST
$ 22 = T->O connection type: POINT2POINT
$ 23 = T->O connection type: reserved
$ 24 = O->T priority: LOW
$ 25 = O->T priority: HIGH
$ 26 = O->T priority: SCHEDULED
$ 27 = O->T priority: reserved
$ 28 = T->O priority: LOW
$ 29 = T->O priority: HIGH
$ 30 = T->O priority: SCHEDULED
$ 31 = T->O priority: reserved
,,Assem8, $ O->T RPI, size, format
,,Assem24, $ T->O RPI, size, format
,, $ proxy config size, format
,, $ target config size, format
"As_0x08_0x18", $ Connection Name
"", $ help string
"20 04 24 01 2C 08 2C 18"; $ Path
Connection4 =
0x04010002, $ 0-15 = supported transport classes
$ 16 = trigger: cyclic
$ 17 = trigger: change of state
$ 18 = trigger: application
$ 19-23 = trigger: reserved
$ 24 = application type: listen-only
$ 25 = application type: input-only
$ 26 = application type: exclusive-owner
$ 27 = application type: redundant-owner
$ 28-30 = reserved
$ 31 = Direction: Client = 0 / Server = 1
0x22660405, $ 0 = O->T fixed size supported
$ 1 = O->T variable size supported
$ 2 = T->O fixed size supported
$ 3 = T->O variable size supported
$ 4-5 = O->T number of bytes per slot (obsolete)
$ 6-7 = T->O number of bytes per slot (obsolete)
$ 8-10 = O->T Real time transfer format
$ 11 = reserved
$ 12-14 = T->O Real time transfer format
$ 15 = reserved
$ 16 = O->T connection type: NULL
$ 17 = O->T connection type: MULTICAST
$ 18 = O->T connection type: POINT2POINT
$ 19 = O->T connection type: reserved
$ 20 = T->O connection type: NULL
$ 21 = T->O connection type: MULTICAST
$ 22 = T->O connection type: POINT2POINT
$ 23 = T->O connection type: reserved
$ 24 = O->T priority: LOW
$ 25 = O->T priority: HIGH
$ 26 = O->T priority: SCHEDULED
$ 27 = O->T priority: reserved
$ 28 = T->O priority: LOW
$ 29 = T->O priority: HIGH
$ 30 = T->O priority: SCHEDULED
$ 31 = T->O priority: reserved
,,Assem39, $ O->T RPI, size, format
,,Assem24, $ T->O RPI, size, format
,, $ proxy config size, format
,, $ target config size, format
"As_0x27_0x18", $ Connection Name
"Connection with Assemblies 0x27 and 0x18", $ help string
"20 04 24 01 2C 27 2C 18"; $ Path
[Port]
Port1 =
TCP,
"EtherNet/IP",
"20 F5 24 01",
1;